Wireless Communication Test - Wireless Tester - Shenzhen TopSynce Electronic Technology Co., Ltd

T6290U Next Generation Wireless Tester

The new-generation wireless tester T6290U is built on a brand-new hardware platform, meeting the current and future RF performance testing requirements of the industry. Designed to address the demands for wide bandwidth, low phase noise, high frequency, and multi-mode support, the T6290U covers a wide range of test scenarios from R&D to mass production, offering customers a more valuable solution.

The T6290U supports testing from 100MHz to 10GHz with analysis bandwidth of up to 2400 MHz. It is capable of testing 5G NR in both the SUB-6GHz and 7.125 GHz frequency bands as defined by the 5G standard. While supporting cellular testing, the T6290U also enables Wi-Fi 6E/7 performance testing and full-feature UWB R&D testing. The product features two independent transmit/receive channels, expanding the number of measurement ports up to 16, significantly improving production line testing efficiency and enabling MIMO measurements.

Key Features

1. Excellent RF Performance

Frequency from 100MHz to 10GHz
2.4GHz Analysis Bandwidth
Phase Noise: ≤ 0.13 degrees (1kHz to 100 MHz), Freq 100MHz to 10GHz

2. One-Stop Solution

Full Standard Coverage
Cellular communications (2G/3G/4G/5G)
Short-range communications (UWB, Wi-Fi a/b/g/n/ac/ax/be, Bluetooth 1.0–5.2, GNSS, etc.)

3. Flexible and Upgradeable SW Options

Optional measurement software for different standards
5G NR/other cellular technologies /IoT/Wi-Fi 6E/Wi-Fi 7/other Wi-Fi standards/Bluetooth/GPS/UWB can all be flexibly configured via software options
Scalable MIMO architecture supporting up to 16x16 T-MIMO testing

4. Multi-Scenario Support

Supports cellular non-signaling tests and WBG factory tests
Wi-Fi R&D testing, with optimized RF channel phase noise performance to meet non-signaling R&D test requirements
Wi-Fi MIMO testing
Full-scenario UWB testing

Key Parameters

Frequency
Frequency Range	100MHz~10GHz
Frequency Resolution	1 Hz
VSWR	< 1.4 typ. 400MHz to 6GHz < 1.8 typ. 6GHz to 10GHz
Signal Generator
Maximum Bandwidth	2.4GHz
In-Band Amplitede Flatness	Bandwidth=500 MHz: < ±1.5 dB Bandwidth=1000 MHz: < ±2.5 dB Bandwidth=2000 MHz: < ±3.5 dB
Ourput signal power range	100MHz to 4GHz: -130 dBm to +5 dBm 4GHz to 6GHz: -120 dBm to 0 dBm 6GHz to 10HHz: -110 dBm to -10 dBm
Outpur signal power accuracy	100MHz to 6GHz:+0.6dB,output level≥-80dBm 6GHz to 10GHz:±1.0dB,output level≥-80dBm
Output signal phase noise	≤ 0.13 degrees (1kHz to 100 MHz), Freq 100 MHz to 10GHz
Signal Analyzer
Maximum analysis bandwidth	2.4GHz
Maximum Input Power	+34 dBm, CW, continuous input
Measurement accuracy	400MHz to 6GHz:+0.6dB, output power level >-50dbm 6GHz to 8GHz:+1.0dB, output power level >-50dbm
General parameter
Channel and port	Two independent RF channels 16 full duplex ports
Size	362mm x 66mm x 500mm
Weight	Approx. 11kg

Key Features

Key Parameters

+86 18988756718